SANITEC – STAINLESS STEEL HYGENIC COVING
FINISHES
SANITEC SB-IL stainless steel cove-shaped profiles are easy to clean and designed to comply with hygiene standards for public spaces subjected to sanitary inspection such as hospitals, food processing plants and public bathrooms. This transition profile is installed on site; the wall and floor coverings are then laid flush onto the lip on the profile.
Stainless Steel
Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics.
AISI 304 STAINLESS STEEL – EN X 5 CrNi 18 10 – DIN 1.4301:
This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.
ACCESSORIES
Sanitec SBI to join the internal corners of the Sanitec SB steel profile
Sanitec SBI internal fittings have been designed to allow the creation of an internal corner between two Sanitec SB profiles. A result of completion and continuity will thus be obtained. To be combined with the SB stainless steel profile.
Sanitec SBE to connect the external corners of the Sanitec SB steel profile
Sanitec SBE external fittings take on the function of connection between two Sanitec SB profiles that generate an external corner. They are not universal in that they assume this function and that of aesthetic continuity. To be combined with the SB stainless steel profile.
Sanitec SBF with terminal function for Sanitec SB profile in Stainless Steel
The SANITEC SBF end caps fit perfectly with the entire range of SANITEC SB profiles, finishing the end of the profile flawlessly. They are supplied with the appropriate fins, to be folded during installation, laid out, so they can be adapted to the right or left depending on site and project requirements.
Sanitec SBG with joint function for Sanitec SB profile in Stainless Steel
The SANITEC SBG joints are made with the same features as the SANITEC SB profiles, to ensure a perfect fit with the profiles and achieve an elegant and functional seal at the points where one profile joins the other.
Sanitec SBT with triaxial connection function for the Sanitec SB steel profile
Sanitec SBT triaxial fittings are compatible with Sanitec SB profiles and allow triaxial connection effects thus converging three profiles in a single point. To be combined with the SB stainless steel profile.
